Remote control release - Raspberry Pi Forums
transmit wireless signal battery powered receiver, activating solenoid.
solenoid triggers release of bottle filled compressed gas.
distance 300 plus yds. clear line of sight.
pressing button #1 activates receiver #1 releasing bottle. cycles through # of receivers in field. releasing #1 #4 or more, 1 @ time.
receiver stations have multiple pressurized bottles.
on completion of bottle release #1 #2 #3 #4 etc., transmitter , receiver can repeat cycle,until bottles have been released.
low power use.
simplicity , dependability required.
ras pi transmitter plus ?? receivers.
solenoid triggers release of bottle filled compressed gas.
distance 300 plus yds. clear line of sight.
pressing button #1 activates receiver #1 releasing bottle. cycles through # of receivers in field. releasing #1 #4 or more, 1 @ time.
receiver stations have multiple pressurized bottles.
on completion of bottle release #1 #2 #3 #4 etc., transmitter , receiver can repeat cycle,until bottles have been released.
low power use.
simplicity , dependability required.
ras pi transmitter plus ?? receivers.
perhaps arduino + xbee better solution ?
should consume less power.
ghans
edit: xbee looks quite expensive.
if bit inventive , might build on another
solution (as first , proper ecc should added imho) :
http://www.glacialwanderer.com/hobbyrobotics/?p=291
should consume less power.
ghans
edit: xbee looks quite expensive.
if bit inventive , might build on another
solution (as first , proper ecc should added imho) :
http://www.glacialwanderer.com/hobbyrobotics/?p=291
raspberrypi
Comments
Post a Comment