code for two motors

i'm running 2 motors connected transistor. pin 9 first motor , pin 10 second motor. i've written code. first of both motors should rotate 10 seconds , turn off. first motor(pin 9) should rotate on own 2 seconds , turn off. following code correct?

code: [select]


const int transistorpin = 9;    // connected base of transistor
const int transistorpin = 10;

void setup() {
  // set  the transistor pin output:
  pinmode(transistorpin, output);
}

void loop() {
  digitalwrite(transistorpin, high);
  delay(10000);
  digitalwrite(transistorpin, low);
}

const int transistorpin = 9;    // connected base of transistor

void setup() {
  // set  the transistor pin output:
  pinmode(transistorpin, output);
}

void loop() {
  digitalwrite(transistorpin, high);
  delay(2000);
  digitalwrite(transistorpin, low);
}


it may correct 2 sketches (apart multiply-defined "transistorpin"), not one.

the compiler have told that.
you can have 1 "loop" , 1 "setup" in sketch.

please use [font=verdana][[/font]code] [font=verdana][[/font]/code] tags when posting code

Arduino Forum > Using Arduino > Programming Questions > code for two motors

arduino